Search...
Products & Services
Technical Support
About Agilent
Nanotechnology Instruments
Atomic Force Microscopes
Nanomechanical Instruments
Field Emission SEM
Nanomechanical Resources
Hard Materials
Thin Films
General
MEMS
Soft Materials
Tensile Tester
Nano Indenter Application Notes
Home
Nanoindenter Bibliography
Thin Films
Nanoindenter Bibliography
Thin Films
Thermal stability, microstructure and mechanical properties of Ti1 − xZrxN thin films
A. Hoerling,J. Sjölén, H. Willmann, T. Larssonc, M. Oden and L. Hultman
Thin Solid Films Volume 516, Issue 18, 31 July 2008, Pages 6421-6431
Pulsed laser-ablated MoS2-Al films: friction and wear in humid conditions
J. J. Nainaparampil, A. R. Phanib, J. E. Krzanowskib and J. S. Zabinski
Surface and Coatings Technology, Volume 187, Issues 2-3, 22 October 2004, Pages 326-335
Improved interfacial mechanical properties of Al2O3-13wt%TiO2 plasma-sprayed coatings derived from nanocrystalline powders
Pavitra Bansal, Nitin P. Padtureand Alexandre Vasilievnd Alexandre
Acta Materialia
Volume 51, Issue 10, 11 June 2003, Pages 2959-2970
Piezoresistive cantilevers and measurement system for characterizing low force electrical contacts
Beth L. Pruitand Thomas W. Kenny
Sensors and Actuators A: Physical
Volume 104, Issue 1, 15 March 2003, Pages 68-77
Pure-silica zeolite thin films by vapor phase transport of fluoride for low-k applications
Heather K. Hunta, Christopher M. Lewb, Minwei Sunb, Yushan Yanb and Mark E. Davis
Microporous and Mesoporous Materials, Volume 128, Issues 1-3, March 2010, Pages 12-18
Surface characteristics and nanoindentation study of Ni–Mn–Ga ferromagnetic shape memory sputtered thin films
C. Liua, Z.Y. Gaoa, X. Anb, H.B. Wanga, L.X. Gaob and W. Cai
Applied Surface Science, Volume 254, Issue 9, 28 February 2008, Pages 2861-2865
24Wear resistance of NiTi alloy after surface mechanical attrition treatment
T. Hua, C.S. Wenb, G.Y. Sunc, S.L. Wua, C.L. Chu,Z.W. Wua, G.Y. Lic, J. Lub, K.W.K. Yeungf and Paul K. Chu
Surface and Coatings Technology Volume 205, Issue 2, 15 October 2010, Pages 506-510
Adhesion of thin coatings—the VAMAS (TWA 22-2) interlaboratory exercise
Giles Aldrich-SmithE-mail The Corresponding Author, Nigel Jennetta and Jonathan Housden
Surface and Coatings Technology, Volume 197, Issues 2-3, 22 July 2005, Pages 336-344
Analysis of the Mechanical Properties of an Arc Sprayed WC-FeCSiMn Coating: Compression, Bending, and Tension Behavior
W. Tillmann and J. Nebel
JTTEE5 20:317–327
Berkovich indentation-induced deformation behaviors of GaN thin films observed using cathodoluminescence and cross-sectional transmission electron microscopy
Sheng-Rui Jian
Applied Surface Science Volume 254, Issue 21, 30 August 2008, Pages 6749-6753
Biomechanical variation of silk links spinning plasticity to spider web function
Cecilia BoutryCorresponding Author Contact Informationand Todd A. Blackledge
Zoology
Volume 112, Issue 6, November 2009, Pages 451-460
Biomimetic nanostructured coatings on nano-grained/ultrafine-grained substrate: Microstructure, surface adhesion strength, and biosolubility
S. Malia, R.D.K. Misra,M.C. Somanib and L.P. Karjalainen
Materials Science and Engineering: C Volume 29, Issue 8, 15 October 2009, Pages 2417-2427
Bonding Structure and Mechanical Properties of Ti-B-C Coatings
Manuel David Abad, Daniel Caceres, Yury S. Pogozhev, Dmitry V. Shtansky, Juan Carlos Sanchez-Lopez
Plasma Processes and PolymersVolume 6, Issue Supplement 1
Carbon Nanotube Reinforced Polyimide Thin-film for High Wear Durability
N. Satyanarayana, K. S. Skandesh Rajan, Sujeet K. Sinha and Lu Shen
Tribology Letters
Volume 27, Number 2, 181-188
Cathodoluminescence and Cross-sectional Transmission Electron Microscopy Studies for Deformation Behaviors of GaN Thin Films Under Berkovich Nanoindentation
Sheng-Rui Jian, I-Ju Teng and Jian-Ming Lu
Nanoscale Research Letters, Volume 3, Number 4, 158-163
Characterization of the linear viscoelastic behavior of single-wall carbon nanotube/polyelectrolyte multilayer nanocomposite film using nanoindentation
Hongbing Lu, Gang Huanga, Bo Wanga, Arif Mamedovb and Sachin Gu Gang H
Thin Solid Films
Volume 500, Issues 1-2, 3 April 2006, Pages 197-202
Characterization of thermally treated TiAlSiN coatings by TEM and nanoindentation
M. Parlinska-Wojtana, A. Karimi, O. Coddetb, T. Cselleb and M. Morstein
Surface and Coatings Technology
Volumes 188-189, November-December 2004, Pages 344-350
Correlation of elastic modulus, hardness and density for sputtered TiAlBN thin films
C. Rebholz,A. Leylandb, A. Matthewsb, C. Charitidisc, S. Logothetidisd and D. Schneider
Thin Solid Films Volume 514, Issues 1-2, 30 August 2006, Pages 81-86
Cross-sectional transmission electron microscopy observations of structural damage in Al0.16Ga0.84N thin film under contact loading
Sheng-Rui Jian, Jenh-Yih Juang, and Yi-Shao Lai
J. Appl. Phys. 103, 033503 (2008)
Cross-sectional transmission electron microscopy observations on the Berkovich indentation-induced deformation microstructures in GaN thin films
Chi-Hui Chien, Sheng-Rui Jian, Chung-Ting Wang, Jenh-Yih Juang, J C Huang and Yi-Shao Lai
Journal of Physics D: Applied Physics , Volume 40, Number 13
DC-MSIP/HPPMS (Cr,Al,V)N and (Cr,Al,W)N thin films for high-temperature friction reduction
K. Bobzina, N. Bagcivana, M. Eweringa, R.H. Brugnaraa and S. Theiß
Surface and Coatings Technology Volume 205, Issues 8-9, 25 January 2011, Pages 2887-2892
Deposition of TiN coatings on shape memory NiTi alloy by plasma immersion ion implantation and deposition
Y. Chenga and Y.F. Zheng
Thin Solid Films
Volume 515, Issue 4, 5 December 2006, Pages 1358-1363
Depth-sensing indentation for assessing the mechanical properties of cold-sprayed Ta
Giovanni Bolelli,Benedetta Bonferronia, Heli Koivuluotob, Luca Lusvarghia and Petri Vuoristo
Surface and Coatings Technology Volume 205, Issue 7, 25 December 2010, Pages 2209-2217
Detecting very small quantity of molecular probes in solution using nano-mechanically made Au-cavities array with SERS-active effect
Chia-Wei Changa, Jiunn-Der LiaoYin-Yi Lina and Chih-Chiang Wengs
Sensors and Actuators B: Chemical
Article in Press, Corrected Proof - Note to users
Determination of film-only hardness by eliminating the effects of elastic deformation of substrate
Hairong Wang and Chung Wo Ong
Surface and Coatings Technology Volume 200, Issues 14-15, 10 April 2006, Pages 4433-4439
Determining the interfacial toughness of low-k films on Si substrate by wedge indentation: Further studies
Kong Boon Yeapa, Kaiyang Zeng,and Dongzhi Chi
Acta Materialia Volume 56, Issue 5, March 2008, Pages 977-984
Effect of polyethylene pretreatments on the biomimetic deposition and adhesion of calcium phosphate films
K.C. Baker, J. Drelicha, I. Miskioglub, R. Israelc and H.N. Herkowitz
Acta Biomaterialia Volume 3, Issue 3, May 2007, Pages 391-401
Effect of silicon doping on the mechanical and optical properties of carbon nitride thin films
D. Sarangi, R. Sanjinés and A. Karimi
Thin Solid Films
Volumes 447-448, 30 January 2004, Pages 217-222
Effect of the radio-frequency power on the dielectric properties of hydrogen-containing boron carbon nitride films deposited by plasma-assisted chemical vapor deposition using tris(dimethylamino)boron gas
Hidemitsu AokiCorresponding Author Contact InformationTakuro Masuzumia, Makoto Haraa, Daisuke Watanabea, Chiharu Kimuraa and Takashi Sugino
Thin Solid Films
Volume 518, Issue 8, 1 February 2010, Pages 2102-2104
Effect of titanium carbide coating by ion plating plasma-assisted deposition on osteoblast response: A chemical, morphological and gene expression investigation
Giovanni LongoMarco Girasolea, Giuliano Pompeoa, Antonio Cricentia, Carlo Misianob, Alice Acclavioc, Anna Chiara Tizzonid, Luca Mazzolae, Paolo Santinid, Laura Politid and Roberto Scandurra
Surface and Coatings Technology
Volume 204, Issues 16-17, 15 May 2010, Pages 2605-2612
Effects of annealing on the microstructure and the mechanical properties of EB-PVD thermal barrier coatings
N. Zotov, M. Bartschb, L. Chernovab, D.A. Schmidtc, M. Havenithc and G. Eggeler
Surface and Coatings Technology
Volume 205, Issue 2, 15 October 2010, Pages 452-464
Effects of normal load on nanotribological properties of sputtered carbon nitride films
C.A. Charitidisand S. Logothetidisnd S. Logothetidis
Diamond and Related Materials
Volume 14, Issue 1, January 2005, Pages 98-108
Effects of substrate bias and growth temperature on properties of aluminium oxide thin films by using filtered cathodic vacuum arc
B.K. Tay, Z.W. Zhao and C.Q. Sun
Surface and Coatings Technology Volume 198, Issues 1-3, 1 August 2005, Pages 94-97
Electrical and mechanical properties of nitrided sol-gel derived TiO2 and SiO2–TiO2 films
BARBARA KOZCIELSKA, LEON MURAWSKI, LESZEK WICIKOWSKI
Materials Science-Poland, Vol. 23, No. 1, 2005
Electrical and mechanical properties of diluted magnetic semiconductor Zn1−xMnxS nanocrystalline films
D. Sreekantha Reddy, B. Kanga, S.C. Yua, Y. Dwarakanadha Reddyc, S.K. Sharmab, K.R. Gunasekharb, K.N. Raob and P. Sreedhara Reddy
Current Applied Physics
Volume 9, Issue 2, March 2009, Pages 431-434
Electrical, optical and mechanical properties of sputtered CrNy and Cr1yxSixN1.02 thin films
E.Martinez, R.Sanjine´sa, O.Banakhb, F.Le´vy
Thin Solid Films 447 –448 (2004) 332–336
Electrodeposition and characterization of sacrificial copper-manganese alloy coatings: Part II. Structural, mechanical, and corrosion-resistance properties
Jie Gong, Guohua Wei, John A. Barnard and Giovanni Zangari
Metallurgical and Materials Transactions A
Volume 36, Number 10, 2705-2715
Electronic structure and hardening mechanism of Si-doped/undoped diamond-like carbon films
S.C. Ray,T.I.T. Okpalugob, P. Papakonstantinoub, C.W. Baoc, H.M. Tsaic, J.W. Chiouc, J.C. Janc, W.F. Pongc, J.A. McLaughlinb and W.J. Wang
Thin Solid Films Volume 482, Issues 1-2, 22 June 2005, Pages 242-247
Electronic structure of Nb2N and NbN thin films
R. Sanjins, M. Benkahoul, M. Papagno, F. Levy, and D. Music
J. Appl. Phys. 99, 044911 (2006)
Evaluation of incipient plasticity from interfaces between ultra-thin gold films and compliant substrates
Hiroyuki Hirakata, Hiroki Ogiwaraa, Akio Yonezua and Kohji Minoshima
Thin Solid Films
Volume 518, Issue 18, 1 July 2010, Pages 5249-5256
Evaluation of the tribological properties of DLC for engine applications
S D A Lawes, M E Fitzpatrick and S V Hainsworth
Journal of Physics D: Applied Physics, Volume 40, Number 18
Fabrication of surface-structure controlled photopatterns upon transparent silica-acryl nanohybrid films with enhanced thermal and mechanical properties
Dong Jun Kang, Dong Hee Han, Dong Pil Kang, Jae Won Yoo, and Byeong Uk Kim
Optics Express, Vol. 16, Issue 22, pp. 18320-18325 (2008)
Fabrication, Nanomechanical Properties and In Vitro Evaluation of (Ti, O)/Ti Composite Coating on NiTi Shape Memory Alloy
Tao Sun, Lang-Ping Wang, Min Wang, Ho-Wang Tong and William W. Lu
IFMBE Proceedings, 2010, Volume 31, Part 6, 1222-1225
Fabrication, Nanomechanical Properties and In Vitro Evaluation of (Ti, O)/Ti Composite Coating on NiTi Shape Memory Alloy
Tao Sun, Lang-Ping Wang, Min Wang, Ho-Wang Tong and William W. Lu
IFMBE Proceedings, 2010, Volume 31, Part 6, 1222-1225
Fabrication, properties, and cytocompatibility of ZrC film on electropolished NiTi shape memory alloy
C.L. Chu, H.L. Jia, L.H. Yinb, Y.P. Pub, P.H. Lina and Paul K. Chu
Materials Science and Engineering: C Volume 31, Issue 2, 12 March 2011, Pages 423-427
Formation of composite ternary nitride thin films by magnetron sputtering co-deposition
C.S. Sandu,R. Sanjinesa, M. Benkahoula, F. Medjania and F. Levy
Surface and Coatings Technology Volume 201, Issue 7, 20 December 2006, Pages 4083-4089
Hardness enhancement in nanocrystalline tantalum thin films
M. Zhanga, B. Yangb, J. Chuc and T.G. Nieh
Scripta Materialia Volume 54, Issue 7, April 2006, Pages 1227-1230
Hydrogen effect on fracture toughness of thin film/substrate interfaces
Hiroyuki Hirakata, Takeshi Yamadaa, Yoshiki Nobuharaa, Akio Yonezua and Kohji Minoshima
Engineering Fracture Mechanics Volume 77, Issue 5, March 2010, Pages 803-818
Improvement of press dies used for the production of diamond composites by means of DUPLEX-PVD-coatings
Wolfgang Tillmann, Evelina Vogli,and Siavash Momeni
Surface and Coatings Technology Volume 205, Issue 5, 25 November 2010, Pages 1571-1577
Influence of film thickness on laser ablation of hydrogenated amorphous carbon films
G. Daminelli, S. Pentzien, A. Hertwig and J. Krüger
Applied Physics A: Materials Science & Processing
Volume 83, Number 1, 89-94
Influence of nitrogen content on the structural, mechanical and electrical properties of TiN thin films
Vaz, F.Ferreira, J. A.Ribeiro, E.Rebouta, L.Lanceros-Mendez, S.Mendes, J.Alves, E.Goudeau, Ph.Rivire, J. P.Ribeiro, Antonio FernandoMoutinho, IvoPischow, K.Rijk, J.
""Surface and coatings technology"". ISSN 0257-8972. 191:2-3 (Febr.2005) 317-323.
Influence of Si on the microstructure of arc evaporated (Ti,Si)N thin films
A. Flink,T. Larssonb, J. Sjo¨ le´n, L. Karlssonc and L. Hultman
Surface and Coatings Technology Volume 200, Issues 5-6, 21 November 2005, Pages 1535-1542
Influence of thickness on nanomechanical behavior of Black Diamond™ low dielectric thin films for interconnect and packaging applications
V. N. Sekhar, T. C. Chai, S. Balakumar, Lu Shen, S. K. Sinha, A. A. O. Tay and Seung Wook Yoon
Journal of Materials Science: Materials in Electronics
Volume 20, Number 1, 74-86
Influence of titanium content and temperature on optical and mechanical properties of sol–gel derived TiO2/γ-glycidoxypropyltrimethoxysilane and methyltrimethoxysilane hybrid organic–inorganic films
Wenxiu Que and X Hu
Journal of Physics D: Applied Physics, Volume 36, Number 7
Influence of ultrasonication on the mechanical properties of Cu/Al2O3 nanocomposite thin films during electrocodeposition
Minho Kima, Fangfang Suna, Jaebeom Leea, Yang Ki Hyunc and Dongyun Lee
Surface and Coatings Technology Volume 205, Issue 7, 25 December 2010, Pages 2362-2368
Interfacial fracture induced by cross-sectional nanoindentation in metal–ceramic thin film structures
M. R. Elizalde,J. M. Sa´nchez, J. M. Martinez-Esnaolaa, D. Pantusoc, T. Scherbanc, B. Sund and G. Xu
Acta Materialia Volume 51, Issue 14, 15 August 2003, Pages 4295-4305
Measurement of Young’s modulus and Poisson’s ratio of thin coatings using impact excitation and depth-sensing indentation
A. S. Maxwell, S. Owen-Jones, and N. M. Jennett
Rev. Sci. Instrum. 75, 970 (2004)
Mechanical Behavior of Air Plasma-Sprayed YSZ Functionally Graded Mullite Coatings Investigated via Instrumented Indentation
C. V. Cojocaru, Y. Wang, C. Moreau, R. S. Lima, J. Mesquita-Guimarães, E. Garcia, P. Miranzo and M. I. Osendi
Journal of Thermal Spray Technology, Volume 20, Numbers 1-2, 100-107
Mechanical characterization of nano-reinforced silica based sol–gel hybrid coatings on AISI 316L stainless steel using nanoindentation techniques
Josefina Ballarre,Emilio Jimenez-Piqueb, Marc Angladab, Sergio A. Pellicea and Ana L. Cavalieri
Surface and Coatings Technology Volume 203, Issues 20-21, 15 July 2009, Pages 3325-3331
Mechanical characterization of reactively magnetron-sputtered TiN films
F. Vaz, P. Machadoa, L. Rebouta, P. Cerqueiraa, Ph. Goudeaub, J. P. Rivie`re, E. Alvesc, K. Pischowd and J. de Rijk
Surface and Coatings Technology Volumes 174-175, September-October 2003, Pages 375-382
Mechanical modelling of multilayer optical coatings
E. G-Berasategui,S. J. Bull and T. F. Page
Thin Solid Films Volumes 447-448, 30 January 2004, Pages 26-32
Mechanical properties and machining performance of Ti1xAlxN-coated cutting tools
A. Ho¨rlinga, L. Hultmana, M. Ode´nb, J. Sjo¨le´nc, L. Karlsson
Surface and Coatings Technology Volume 191, Issues 2-3, 21 February 2005, Pages 384-392
Mechanical properties measured by nano-indentation of Pb(Zr, Ti)03 sol–gel films deposited on Pt and LaNi03 electrodes
P. Delobelle,G.S. Wangb, E Fribourg-Blancband D. Remiens
Surface and Coatings Technology Volume 201, Issue 6, 4 December 2006, Pages 3155-3162
Mechanical properties of sputtered silicon nitride thin films
M. Vila, D. D. Ca´ceres, and C. Prieto
J. Appl. Phys. 94, 7868 (2003)
Mechanical Study of High Resistance Silicon Carbide Based Multi-Nano-Layers Grown by Multifrequency PACVD
Farida Rebib, Thomas Gaudy, Audrey Soum-Glaude, Isabelle Caron,
Tony Da Silva, Christine Picard, Fabienne Cournut, Laurent Thomas
Plasma Processes and PolymersVolume 6, Issue Supplement 1
Metal carbide/amorphous C-based nanocomposite coatings for tribological applications
J.C. Sanchez-Lopez, D. Martinez-Martineza, M.D. Abada and A. Fernandez
Surface and Coatings Technology Volume 204, Issues 6-7, 25 December 2009, Pages 947-954
Microstructural characterization of MgO thin films grown by radio-frequency sputtering. Target and substrate-temperature effect
D. Ca´ceres, I. Vergara, and R. Gonzalez
J. Appl. Phys. 93, 4300 (2003)
Microstructural, mechanical and magnetic properties of shape memory alloy Ni55Mn23Ga22 thin films deposited by radio-frequency magnetron sputtering
F. Bernarda, P. Delobelle,C. Rousselota and L. Hirsinger
Thin Solid Films Volume 518, Issue 1, 2 November 2009, Pages 399-412
Microstructure and mechanical properties of AlN films obtained by plasma enhanced chemical vapor deposition
Gustavo Sánchez, B. Abdallah, P. Tristant, C. Dublanche-Tixier, M. A. Djouadi, M. P. Besland, P. Y. Jouan and A. Bologna Alles
Journal of Materials Science
Volume 44, Number 22, 6125-6134
Microstructure, mechanical properties, and blood compatibility of zirconium nitride deposited on nickel–titanium shape memory alloy
C.L. Chu, H.L. Jia, L.H. Yinb, Y.P. Pub, P.H. Lina and Paul K. Chu
Surface and Coatings Technology Volume 204, Issues 16-17, 15 May 2010, Pages 2841-2845
Modelling the limits of coating toughness in brittle coated systems
Jinju Chen, and S.J. Bull
Thin Solid Films Volume 517, Issue 9, 2 March 2009, Pages 2945-2952
Modified-creep experiment of an elastomer film on a rigid substrate using nanoindentation with a flat-ended cylindrical tip
Seung Tae Choi, Su Jeong Jeongb, and Youn Young Earmme
Scripta Materialia Volume 58, Issue 3, February 2008, Pages 199-202
Morphological, structural and mechanical properties of NbN thin films deposited by reactive magnetron sputtering
C.S. Sandu,M. Benkahoul, M. Parlinska-Wojtan, R. Sanjinés and F. Lévy
Surface and Coatings Technology Volume 200, Issues 22-23, 20 June 2006, Pages 6544-6548
Multi-parameter models of the viscoelastic/plastic mechanical properties of coatings via combined nanoindentation and non-linear finite element modeling
Timothy C. OvaertCorresponding Author Contact Information, Byung Ro Kimb and Byung Ro Kimb and Jianjun Wangc
Progress in Organic Coatings
Volume 47, Issues 3-4, September 2003, Pages 312-323
Nanocrystalline tetragonal tantalum thin films
M. Zhanga, Y.F. Zhanga, P.D. Racka, M.K. Millerb and T.G. Nieh
Scripta Materialia Volume 57, Issue 11, December 2007, Pages 1032-1035
Nanoindentation and photoluminescence characterization of ZnO thin films and single crystals
R. Zabelsa, F. MuktepavelaL. Grigorjevaa, E. Tamanisb and M. Mishels-Piesins
Optical Materials
Volume 32, Issue 8, June 2010, Pages 818-822
Nanoindentation combined with scanning force microscope for characterization of mechanical properties of carbon nitride thin films
S. Chowdhury, M. T. LaugierCorresponding Author Contact Information, I. Z. Rahman and M. Serantoni
Surface and Coatings Technology
Volumes 177-178, 30 January 2004, Pages 537-544
Nanoindentation measurements of combustion CVD Al2O3 and YSZ films
D. W. Stollberga, J. M. Hampikian,L. Riesterb and W. B. Carter
Materials Science and Engineering A Volume 359, Issues 1-2, 25 October 2003, Pages 112-118
Nano-indentation of hybrid silica coatings on surgical grade stainless steel
Josefina Ballarre,Damián A. Lopeza and Ana L. Cavalieri
Thin Solid Films Volume 516, Issue 6, 30 January 2008, Pages 1082-1087
Tailored synthesis of nanostructured WC/a-C coatings by dual magnetron sputtering
M.D. Abada, M.A. Muñoz-Márquez, S. El Mrabeta, A. Justoa and J.C. Sanchez-Lopez
Surface and Coatings Technology Volume 204, Issues 21-22, 15 August 2010, Pages 3490-3500
The aging of metallic thin films: Delamination, strain relaxation, and diffusion
M. S. Kennedy, N. R. Moody and D. F. Bahr
JOM Journal of the Minerals, Metals and Materials Society
Volume 59, Number 9, 50-53
The contact response of thin SiC-coated silicon systems—characterisation by nanoindentation
E. G. Berasategui, and T. F. Page
Surface and Coatings Technology Volumes 163-164, 30 January 2003, Pages 491-498
The influence of methane/argon plasma composition on the formation of the hydrogenated amorphous carbon films
Hsin-Hung Chena, Jiunn-Der LiaoChih-Chiang Wenga, Jui-Fu Hsieha, Chia-Wei Changa, Chao-Hsien Linb and Ting-Pin Cho
Thin Solid Films, Volume 519, Issue 6, 3 January 2011, Pages 2049-2053
The influence of nitrogen content on the properties of TiNX thin films
D. MUNTEANU, F. VAZa
JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS Vol. 8, No. 2, April 2006, p. 720 - 725
The role of substrate plasticity on the tribological behavior of diamond-like nanocomposite coatings
J.M. Jungka, J.R. Michaela and S.V. Prasad
Acta Materialia Volume 56, Issue 9, May 2008, Pages 1956-1966
Ultra-High Tribological Performance of Magnetron Sputtered a-C:H Films in Sand-Dust Environment
Jianwei Qi • Liping Wang • Fengyuan Yan • Qunji Xue
Tribol Lett (2010) 38:195–205
Vapor-Deposited Fluorinated Glycidyl Copolymer Thin Films with Low Surface Energy and Improved Mechanical Properties
Yu Mao and Karen K. Gleason
Macromolecules, 2006, 39 (11), pp 3895–3900
Variable temperature thin film indentation with a flat punch
Graham L. W. Cross, Barry S. O'Connell, John B. Pethica, Harry Rowland, and William P. King
Rev. Sci. Instrum. 79, 013904 (2008)
ZrOxNy decorative thin films prepared by the reactive gas pulsing process
Pedro Carvalho, Luis Cunha, Eduardo Alves, Nicolas Martin, Eric Le Bourhis and Filipe Vaz
Journal of Physics D: Applied Physics , Volume 42, Number 19