Nanotechnology Instruments
Nanomechanical Resources
Nanoindenter Bibliography
Hard Materials
- Effects of composition and thermal annealing on the mechanical properties of silicon oxycarbide films
P. Du, X. Wang, I-K. Lin, and X. Zhang
Sensors and Actuators A: Physical, 2012, Volume 176, Page 90-98. - The Role of Interphase Boundaries in the Deformation Behaviour of Fine-Grained Sn-38wt. Pb Eutectics
F. Muktepavela, G. Bakradze, R. Zabels
Veritsa Volume 46, Number 1 / 2009 33-34 - Contact residual stress relaxation in soda-lime glass: Part I. Measurement using nanoindentation
Kwadwo Kese,Matilda Tehler and Bill Bergman
Journal of the European Ceramic Society Volume 26, Issue 6, 2006, Pages 1003-1011 - Optical and mechanical properties of sol–gel silica–titania hard optical coatings derived from methyltrimethoxysilane and tetrapropylorthotitanate as precursors
Wenxiu Que,and X. Hu
Optical Materials Volume 22, Issue 1, March 2003, Pages 31-37 - Nanoindentation mapping of mechanical properties of cement paste and natural rocks
Wenzhong Zhu, John J. HughesE-mail The Corresponding Author, Nenad Bicanicand Chris J. Pearce
Materials Characterization
Volume 58, Issues 11-12, November-December 2007, Pages 1189-1198 - Size-induced weakening and grain boundary-assisted deformation in 60 nm grained Ni nanopillars
Dongchan Jangand Julia R. Greer
Scripta Materialia
Volume 64, Issue 1, January 2011, Pages 77-80 - Effect of filler size and shape on local nanoindentation modulus of resin-composites
Konstantinos Masouras, Riaz Akhtar, David C. Watts and Nick Silikas
Journal of Materials Science: Materials in Medicine
Volume 19, Number 12, 3561-3566 - Fabrication, structure and mechanical properties of indium nanopillars
Gyuhyon Leea, Ju-Young Kimb, Arief Suriadi Budimanc, Nobumichi Tamurad, Martin Kunzd, Kai Chend, Michael J. Bureka, Julia R. Greerb and Ting Y. Tsui
Acta Materialia
Volume 58, Issue 4, February 2010, Pages 1361-1368 - Focused ion beam ring drilling for residual stress evaluation
Alexander M. KorsunskyMarco Sebastianib and Edoardo Bemporad
Materials Letters
Volume 63, Issue 22, 15 September 2009, Pages 1961-1963 - Indentation-induced phase transformations in silicon: influences of load, rate and indenter angle on the transformation behavior
Jae-il Janga, M.J. Lanceb, Songqing Wena, Ting Y. Tsuic and G.M. Pharr
Acta Materialia
Volume 53, Issue 6, April 2005, Pages 1759-1770 - Measuring the cell wall mechanical properties of Al-alloy foams using the nanoindentation method
M.A. Hasan, A. Kimb and H.-J. Lee
Composite Structures
Volume 83, Issue 2, April 2008, Pages 180-188 - Mechanical behavior of shear bands and the effect of their relaxation in a rolled amorphous Al-based alloy
W.H. Jianga, F.E. Pinkertonb and M. Atzmon
Acta Materialia
Volume 53, Issue 12, July 2005, Pages 3469-3477 - Mechanical properties of cellular ceramics obtained by gel casting: Characterization and modeling
C. Bartuli, E. Bemporad, J.M. Tulliani, J. Tirillo, G. Pulci, M.Sebastiani
Journal of the European Ceramic Society
Volume 29, Issue 14, November 2009, Pages 2979-2989 - Nucleation and growth of hydroxyapatite nanocrystals for nondestructive repair of early caries lesions
Kazuo Onuma, Kazue Yamagishib and Ayako Oyane
Journal of Crystal Growth
Volume 282, Issues 1-2, 15 August 2005, Pages 199-207 - Optical and mechanical characterization of ultrananocrystalline diamond films prepared in dual frequency discharges
Monika Karáskováa, Lenka Zajíc(ková Vilma Buršíkováa, Daniel Frantaa, David Nec(asa, Olga Bláhováb and Jir(í Šperka
Surface and Coatings Technology
Volume 204, Issues 12-13, 15 March 2010, Pages 1997-2001 - Size, geometry and nonuniformity effects of surface-nanocrystalline aluminum in nanoindentation test
Yueguang Wei, Siqi Shu, Ying Du and Chen Zhu Siqi Shu,
International Journal of Plasticity
Volume 21, Issue 11, November 2005, Pages 2089-2106 - A combinatorial thin film sputtering approach for synthesizing and characterizing ternary ZrCuAl metallic glasses
Y.P. Denga, Y.F. Guana, J.D. Fowlkesa, S.Q. Wena, F.X. Liua, G.M. Pharra, P.K. Liawa, C.T. Liua and P.D. Rack
Intermetallics Volume 15, Issue 9, September 2007, Pages 1208-1216 - A critical assessment of indentation-based ductile damage quantification
C.C. Tasan, J.P.M. Hoefnagels, M.G.D. Geers
Acta Materialia 57 (2009) 4957–4966 - A novel nano-micro structured octacalcium phosphate/ protein composite coating on titanium by using an electrochemically induced deposition
Hui Wang,Chang-Jian Lin,Ren Hu,Fa Zhang,Li-Wen Lin
Journal of Biomedical Materials Research Part AVolume 87A, Issue 3 - A study of the mechanical properties of nanowires using nanoindentation
Gang Feng, William D. Nix, Youngki Yoon, and Cheol Jin Lee
J. Appl. Phys. 99, 074304 (2006) - Atomic force microscopy investigations on nanoindentation impressions of some metals: effect of piling-up on hardness measurements
I. Jauberteau, M. Nadal and J. L. Jauberteau
Journal of Materials Science
Volume 43, Number 17, 5956-5961 - Berkovich nanoindentation on InP
Sheng-Rui Jian, and Jason Shian-Ching Jang
Journal of Alloys and Compounds Volume 482, Issues 1-2, 12 August 2009, Pages 498-501 - Bioprospecting Finds the Toughest Biological Material: Extraordinary Silk from a Giant Riverine Orb Spider
Agnarsson, Matjaž Kuntner, Todd A. Blackledge
PlOs One - Bone properties surrounding hydroxyapatite-coated custom osseous integrated dental implants
M. I. Baker, A. W. Eberhardt, D. M. Martin, G. McGwin, J. E. Lemons
Journal of Biomedical Materials Research Part B: Applied Biomaterials
Volume 95B, Issue 1, pages 218–224, October 2010 - Buckling instabilities in multiwalled carbon nanotubes under uniaxial compression
J. F. Waters, L. Riester, M. Jouzi, P. R. Guduru, and J. M. Xu
Appl. Phys. Lett. 85, 1787 (2004) - Characterization of carbon nanolayers flash evaporated on PET and PTFE
V. S vorc?ka, T. Hubacek, P. Slepicka, J. Siegela, Z. Kolska, O. Bla´hovac,
A. Mackovad, V. Hnatowicz
Carbon Volume 47, Issue 7, June 2009, Pages 1770-1778 - Characterization of interconnect interfacial adhesion by cross-sectional nanoindentation
T. Scherban, D. Pantuso, B. Sun, S. El-Mansy, J. Xu, M.R. Elizalde, J.M. Sánchez and J.M. Martínez-Esnaola
International Journal of Fracture
Volume 120, Numbers 1-2, 421-429 - Characterization of Irradiation Damage of Ferritic ODS Alloys with Advanced Micro-Sample Methods
M. A. Pouchon, J. Chen, R. Ghisleni, J. Michler and W. Hoffelner
Experimental Mechanics
Volume 50, Number 1, 79-84 - Characterization of pop-in phenomena and indentation modulus in a polycrystalline ZrB2 ceramic
Stefano GuicciardiE-mail The Corresponding Author, Cesare Melandria and Frederic Tullio Monteverde
Journal of the European Ceramic Society
Volume 30, Issue 4, March 2010, Pages 1027-1034 - Characterization of thermally treated TiAlSiN coatings by TEM and nanoindentation
M. Parlinska-Wojtana, A. Karimi, O. Coddetb, T. Cselleb and M. Morstein
Surface and Coatings Technology
Volumes 188-189, November-December 2004, Pages 344-350 - Characterization of ultra-low-load (µN) nanoindents in GaAs(100) using a cube corner tip
Curtis R Taylor, Ajay P Malshe, Gregory Salamo, Robin N Prince, Laura Riester and Seong Oh Cho
Smart Materials and Structures
Volume 14, Number 5 - Combined numerical simulation and nanoindentation for determining mechanical properties of single crystal copper at mesoscale
Y. liu, B Wang, M. Yoshino, S. Roy, H. Lu, R Komanduri
Journal of Mechanics and Physics Solids 53 2718-2741 - Comparison of mechanical behavior between bulk and ribbon Cu-based metallic glasses
W.H. Jiang, F.X. Liua, Y.D. Wanga, H.F. Zhangc, H. Chooa, d and P.K. Liaw
Materials Science and Engineering: A
Volume 430, Issues 1-2, 25 August 2006, Pages 350-354 - Conducting atomic force microscopy study of phase transformation in silicon nanoindentation
Shu-Te Ho, Yu-Hsien Chang, and Heh-Nan Lin
J. Appl. Phys. 96, 3562 (2004); - Controlling gradation of surface strains and nanostructuring by large-strain machining
R. Calistesa, S. Swaminathanb, T.G. Murthya, C. Huanga, C. Saldanaa, M.R. Shankarc and S. Chandrasekar
Scripta Materialia Volume 60, Issue 1, January 2009, Pages 17-20 - Copper nanocolloids in MgO crystals implanted with Cu ions
B. Savoinia, D. Caceresa, R. Gonzalez, Y. Chenb, J. V. Pintoc, R. C. da Silvac, e and E. Alves
Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms Volume 218, June 2004, Pages 148-152 - Correlation of elastic modulus, hardness and density for sputtered TiAlBN thin films
C. Rebholz,A. Leylandb, A. Matthewsb, C. Charitidisc, S. Logothetidisd and D. Schneider
Thin Solid Films Volume 514, Issues 1-2, 30 August 2006, Pages 81-86 - Corrosion behavior on orthopedic NiTi alloy with nanocrystalline/amorphous surface
T. Hua, Y.C. Xinb, S.L. Wua, C.L. Chu,J. Lue, L. Guana, H.M. Chena, T.F. Hunga, K.W.K. Yeungf and Paul K. Chu
Materials Chemistry and Physics - Decreased material properties of extracellular bone matrix in phospho1-/- hypomineralization model
M.A.J. FinniläC. Huesa, W. Zhu, M.C. Yadav, J.L. Millan, C. Farquharson and K.E. Tanner
Bone, Volume 47, Supplement 1, June 2010, Pages S82-S83 - Deposition and characterization of hybrid filtered arc/magnetron multilayer nanocomposite cermet coatings for advanced tribological applications
V.I. Gorokovskya, C. BowmanE-mail The Corresponding Author, P.E. Gannona, D. VanVorousa, A.A. Voevodinc, C. Muratorec, Y.S. Kangc and J.J. Hu
Wear, Volume 265, Issues 5-6, 25 August 2008, Pages 741-755 - Deposition of carbon films onto metal and silicon substrates by filtered cathodic vacuum arc, plasma enhanced CVD and unbalanced magnetron sputtering
I. Ahmad, P. D. Maguire, P. Lemoine, S. S. Roy and J. A. McLaughlin
Diamond and Related Materials Volume 13, Issues 4-8, April-August 2004, Pages 1346-1349 - Depth-dependent mechanical properties of enamel by nanoindentation
Jikou Zhou, Luke L. Hsiung
Journal of Biomedical Materials Research Part AVolume 81A, Issue 1 - Detailed assessment of indentation size-effect in recrystallized and highly deformed niobium
J. Alkorta,J.M. Martinez-Esnaolaa and J. Gil Sevillano
Acta Materialia Volume 54, Issue 13, August 2006, Pages 3445-3452 - Development of hydroxyapatite/calcium silicate composites addressed to the design of load-bearing bone scaffolds
Simone Sprio, Anna Tampieria, Giancarlo Celottia and Elena Landi
Journal of the Mechanical Behavior of Biomedical Materials
Volume 2, Issue 2, April 2009, Pages 147-155 - Diode Laser Assisted Surface Nitriding of Ti-6Al-4V: Properties of the Nitrided Surface
Amit Biswas, Lin Li, U.K. Chatterjee, I. Manna and Jyotsna Dutta Majumdar
Metallurgical and Materials Transactions A
Volume 40, Number 12, 3031-3037 - Effect of hydrogen on subsurface deformation during indentation of a bulk metallic glass
Byung-Gil Yooa, Jun-Hak Oha, Yong-Jae Kima and Jae-il Jang
Intermetallics Volume 18, Issue 10, October 2010, Pages 1872-1875 - Effect of intermediate heat treatment on mechanical properties of SiCf/SiC composites with BN interphase prepared by ICVI
A. Udayakumar,A. Sri Ganesha, S. Rajab and M. Balasubramanian
Journal of the European Ceramic Society - Effect of microstructure on the nanomechanical properties of Zn1 xCdxSe alloys
Hua-Chiang Wen, Chu-Shou Yangb and Wu-Ching Chou
Applied Surface Science Volume 256, Issue 7, 15 January 2010, Pages 2128-2131 - Effect of residual stress on nanoindented property of Si /C/Si multilayers
Bo-Hsiung Wu,Chen-Kuei Chung,Ting-Ruen Shih Cheng-Chang Peng,Udit-Surya Mohanty
J. Micro/Nanolith. MEMS MOEMS 83, 033030 Jul–Sep 2009 - Effect of surface nanocrystallization on friction and wear properties in low carbon steel
Z.B Wanga, N.R Taoa, S Lib, W Wanga, G Liua, J Luc and K Lu
Materials Science and Engineering: A Volume 352, Issues 1-2, 15 July 2003, Pages 144-149 - Effects of size on the strength and deformation mechanism in Zr-based metallic glasses
Dongchan Jang , Cameron T. Gross, Julia R. Greer
International Journal of Plasticity
Article in Press, Corrected Proof - Note to users - Effects of thermo mechanical processing on the mechanical properties of biocomposite flax fibers evaluated by nanoindentation
Alain Bourmaud,and Christophe Baley
Polymer Degradation and Stability Volume 95, Issue 9, September 2010, Pages 1488-1494 - Electronic structure and hardening mechanism of Si-doped/undoped diamond-like carbon films
S.C. Ray,T.I.T. Okpalugob, P. Papakonstantinoub, C.W. Baoc, H.M. Tsaic, J.W. Chiouc, J.C. Janc, W.F. Pongc, J.A. McLaughlinb and W.J. Wang
Thin Solid Films Volume 482, Issues 1-2, 22 June 2005, Pages 242-247 - Enamel inspired nanocomposite fabrication through amelogenin supramolecular assembly
Yuwei Fana, Zhi Suna, Rizhi Wangb, Christopher Abbotta and Janet Moradian-Oldak
Biomaterials, Volume 28, Issue 19, July 2007, Pages 3034-3042 - Enamel: From brittle to ductile like tribological response
G. Guidonia, M. Swainc and I. Juger
Journal of Dentistry Volume 36, Issue 10, October 2008, Pages 786-794 - Evaluation of macro-hardness from nanoindentation tests
Dejun Ma, Chung Wo Ong and Sing Fai Wong
Journal of Materials Science
Volume 40, Numbers 9-10, 2685-2687 - Evaluation of the depth-dependent yield strength of a nanoindented ion-irradiated Fe–Cr model alloy by using a finite element modeling
Chansun Shin,Hyung-ha Jina and Maan-Won Kim
Journal of Nuclear Materials Volume 392, Issue 3, 1 August 2009, Pages 476-481 - Extraction of flow properties of single-crystal silicon carbide by nanoindentation and finite-element simulation
Sanghoon Shim,Jae-il Jangc and G.M. Pharr
Acta Materialia Volume 56, Issue 15, September 2008, Pages 3824-3832 - Evaluation of the tribological properties of DLC for engine applications
S D A Lawes, M E Fitzpatrick and S V Hainsworth
Journal of Physics D: Applied Physics, Volume 40, Number 18 - Fabrication and characterization of photocurable inorganic–organic hybrid materials using organically modified colloidal-silica nanoparticles and acryl resin
Dong Jun Kang,Dong Hee Hana and Dong Pil Kang
Journal of Non-Crystalline Solids Volume 355, Issue 7, 15 March 2009, Pages 397-402 - Feasibility of diamond-like carbon coatings for orthopaedic applications
D. Sheeja,B. K. Taya and L. N. Nung
Diamond and Related Materials Volume 13, Issue 1, January 2004, Pages 184-190 - Flexoelectric properties of ferroelectrics and the nanoindentation size-effect
M. Gharbia, Z.H. Suna, P. Sharma, K. Whitea and S. El-Borgi
International Journal of Solids and Structures Volume 48, Issue 2, 15 January 2011, Pages 249-256 - Fracture toughness of GIC—A mechanistic approach on the nanoscale
B. Brandt, K. Durst, R. Belli, M. Goeken and U. Lohbauer
Dental Materials
Volume 26, Supplement 1, 2010, Page e32 - Frictional shear induced modification of the mechanical properties of TiAl(Nb) intermetallics near the surface
N. Deyneka-Duprieza, A.P.M. Iqbala, S. Das, R. Wunderlicha and H.-J. Fecht
Journal of Alloys and Compounds Volume 508, Issue 2, 22 October 2010, Pages 446-452 - Hard and superhard TiAlBN coatings deposited by twin electron-beam evaporation
C. Rebholz,A. Leylandb, A. Matthewsb, C. Charitidisc, S. Logothetidisd and D. Schneider M.A. Monclusb, M.A. Bakerb, P.H. Mayrhoferc, P.N. Gibsond, A. Leylande and A. Matthews
Surface and Coatings Technology Volume 201, Issue 13, 26 March 2007, Pages 6078-6083 - Hardness and yield strength of dentin from simulated nano-indentation tests
M. Toparli,and N.S. Koksal
Computer Methods and Programs in Biomedicine Volume 77, Issue 3, March 2005, Pages 253-257 - Hardness enhancement in nanocrystalline tantalum thin films
M. Zhanga, B. Yangb, J. Chuc and T.G. Nieh
Scripta Materialia Volume 54, Issue 7, April 2006, Pages 1227-1230 - Hardness of C, CNx and AlN thin films after rapid thermal annealing
G. Beshkova, G. P. Vassilev,M. R. Elizaldec and T. Gomez-Acebo
Materials Chemistry and Physics Volume 82, Issue 2, 15 November 2003, Pages 452-457 - High modulus nanopowder reinforced dimethacrylate matrix composites for dental cement applications
Yijun Wang,James J. Lee,Isabel K. Lloyd,Otto C. Wilson, Jr.,Marc Rosenblum,Van Thompson
Journal of Biomedical Materials Research Part AVolume 82A, Issue 3 - HRTEM interfacial analysis on superhard TiAlN/Mo multilayers
C. J. Tavares, L. Reboutaa, E. Ribeiroa, J. P. Rivireb, J. Pacaudb and M. F. Denanot
Surface and Coatings Technology Volumes 174-175, September-October 2003, Pages 273-280 - Hydroxyapatite/titania nanocomposites derived by combining high-energy ball milling with spark plasma sintering processes
Wenxiu Que,K.A. Khor,J.L. Xu,and L.G. Yu
Journal of the European Ceramic Society Volume 28, Issue 16, December 2008, Pages 3083-3090 - Improved wear performance of ultra high molecular weight polyethylene coated with hydrogenated diamond like carbon
J.A. Purtolas, V. Martinez-Nogutsa, M.J. Martinez-Morlanesa, M.D. Mariscala, F.J. Medelb, C. Lopez-Santosc and F. Yubero
Wear Volume 269, Issues 5-6, 19 July 2010, Pages 458-465 - Impurity effects in neutron-irradiated simple oxides: Implications for fusion devices
R. Gonzalez,Y. Chenb, D. Ciceresa and I. Vergara
Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms Volume 250, Issues 1-2, September 2006, Pages 324-329 - Influence of 8DSS Peptide on Nano-mechanical Behavior of Juman Enamel
Hsu, HY Chung, J.M. Yong, W. Shi and B. Wu
Journal of Dental Research 2011 90: 88 - Influence of adhesive bond line thickness on joint strength
P. Davies, L. Sohierb, J.-Y. Cognardc, A. Bourmaudd, D. Choqueusea, E. Rinnerte and R. Cre´ ac’hcadec
International Journal of Adhesion and Adhesives Volume 29, Issue 7, October 2009, Pages 724-736 - Influence of Microstructure on the Wear Behavior of SiC-Reinforced Titanium-Matrix Composites Lubricated by Water and by Ethanol
Yuko Hibi, Takashi Murakami, Koji Miyake, and Shinya Sasaki
J. Am. Ceram. Soc., 91 [2] 508–513 (2008) - Influence of polishing time on thermo-oxidation characterization of isothermally aged PMR-15 resin
S. Putthanarata, G.P. Tandonand G.A. Schoeppner
Polymer Degradation and Stability
Volume 92, Issue 11, November 2007, Pages 2110-2120 - Influences of Current Density on Tribological Characteristics of Ceramic Coatings on ZK60 Mg Alloy by Plasma Electrolytic Oxidation
Xiaohong Wu, Peibo Su, Zhaohua Jiang and Song Meng
ACS Appl. Mater. Interfaces, 2010, 2 (3), pp 808–812 - Interface microstructure of alumina mechanically metallized with Ti brazed to Fe–Ni–Co using different fillers
R.M. Nascimento,A.E. Martinellia, A.J.A. Buschinellib and E. Sigismund
Materials Science and Engineering: A Volume 466, Issues 1-2, 25 September 2007, Pages 195-200 - Interfacial fracture induced by cross-sectional nanoindentation in metal–ceramic thin film structures
M. R. Elizalde,J. M. Sa´nchez, J. M. Martinez-Esnaolaa, D. Pantusoc, T. Scherbanc, B. Sund and G. Xu
Acta Materialia Volume 51, Issue 14, 15 August 2003, Pages 4295-4305 - Interfacial strength in fibre reinforced thermoplastics
Thomason, J.L
Interfaces and Interphases in Multicomponent Materials (IIMM), 1-3 September 2010 - Intrinsic mechanical properties of ultra-thin amorphous carbon layers
P. Lemoinea, J.P. Quinna, P.D. Maguirea, J.F. Zhaob and J.A. McLaughlin
Applied Surface Science
Volume 253, Issue 14, 15 May 2007, Pages 6165-6175 - Investigation of the Mechanical Twinning of Antimony Single Crystals by Nanoindentation
O. M. Ostrikov and S. N. Dub
Journal of Engineering Physics and Thermophysics
Volume 76, Number 1, 200-203 - Investigation of the sliding contact properties of WC-Co hard metals using nanoscratch testing
Siphilisiwe NdlovuCorresponding, Karsten Dursta and Mathias Göken
Wear, Volume 263, Issues 7-12, 10 September 2007, Pages 1602-1609 - Investigation of thermal aging damage mechanism of the Cast Duplex Stainless Steel
Zhao-Xi Wang, Fei Xueb, Wen-Hai Guob, Hui-Ji Shia, Guo-Dong Zhangb, c and Guogang Shu
Nuclear Engineering and Design Volume 240, Issue 10, October 2010, Pages 2538-2543 - Mechanical and in vitro biological performances of hydroxyapatite–carbon nanotube composite coatings deposited on Ti by aerosol deposition
Byung-Dong Hahna, Jung-Min Leea, Dong-Soo Park, Jong-Jin Choia, Jungho Ryua, Woon-Ha Yoona, Byoung-Kuk Leea, Du-Sik Shinb and Hyoun-Ee Kim
Acta Biomaterialia Volume 5, Issue 8, October 2009, Pages 3205-3214 - Mechanical and microstructural investigations of nitrided Fe-Cr layers
M. Sennour, C. Jacq and C. Esnouf
Journal of Materials Science
Volume 39, Number 14, 4533-4541 - Mechanical and tribological properties of Ti/TiAlN duplex coatings on high and low alloy tool steels
Wolfgang Tillmann, Evelina Vogli,and Siavash Momeni
Vacuum Volume 84, Issue 3, 5 November 2009, Pages 387-392 - Mechanical characterization of nano-reinforced silica based sol–gel hybrid coatings on AISI 316L stainless steel using nanoindentation techniques
Josefina Ballarre,Emilio Jimenez-Piqueb, Marc Angladab, Sergio A. Pellicea and Ana L. Cavalieri
Surface and Coatings Technology Volume 203, Issues 20-21, 15 July 2009, Pages 3325-3331 - Mechanical Deformation Induced in Si and GaN Under Berkovich Nanoindentation
Sheng-Rui Jian
Nanoscale Research Letters
Volume 3, Number 1, 6-13 - Mechanical properties and machining performance of Ti1xAlxN-coated cutting tools
A. Ho¨rlinga, L. Hultmana, M. Ode´nb, J. Sjo¨le´nc, L. Karlsson
Surface and Coatings Technology Volume 191, Issues 2-3, 21 February 2005, Pages 384-392 - Mechanical Properties Measurement of PECVD Silicon Nitride after Rapid Thermal Annealing Using Nanoindentation Technique
H.-Y. Yan, K.-S. Ou and K.-S. Chen
StrainVolume 44, Issue 3 - Mechanical properties of anatase and semi-metallic TiO2 nanotubes
Felix Schmidt-Steina, Stefan Thiemanna, Steffen Bergera, Robert Hahna and Patrik SchmukiCorresponding Author Contact Information
Acta Materialia, Volume 58, Issue 19, November 2010, Pages 6317-6323 - Mechanical responses of single-crystal ZnO
Sheng-Rui Jian
Journal of Alloys and Compounds Volume 494, Issues 1-2, 2 April 2010, Pages 214-218 - Mechanical Study of High Resistance Silicon Carbide Based Multi-Nano-Layers Grown by Multifrequency PACVD
Farida Rebib, Thomas Gaudy, Audrey Soum-Glaude, Isabelle Caron, Tony Da Silva, Christine Picard, Fabienne Cournut, Laurent Thomas
Plasma Processes and PolymersVolume 6, Issue Supplement 1 - Micro/Nano Indentation and Micro-FTIR Spectroscopy Study of Weathering of Coated Engineering Thermoplastics
Samik Gupta, Jan Lohmeijer , Savio Sebastian, Nisha Preschilla and Amit Biswas
Mater. Res. Soc. Symp. Proc. Vol. 875 © 2005 Materials Research Society - Microscopic superelastic behavior of a nickel-titanium alloy under complex loading conditions
Wangyang Ni, Yang-Tse Cheng, and David S. Grummon
Appl. Phys. Lett. 82, 2811 (2003) - Microstructure and deformation behavior of biocompatible TiO2 nanotubes on titanium substrate
G.A. Crawforda, N. Chawla,K. Dasb, S. Boseb and A. Bandyopadhyay
Acta Biomaterialia Volume 3, Issue 3, May 2007, Pages 359-367 - Microstructure versus Size: Mechanical Properties of Electroplated Single Crystalline Cu Nanopillars
Andrew T. Jennings, Michael J. Burek, and Julia R. Greer
PRL 104, 135503 (2010) - Microstructures and mechanical properties of a directionally solidified NiAl–Mo eutectic alloy
H. Bei,and E.P. George
Acta Materialia Volume 53, Issue 1, 3 January 2005, Pages 69-77 - Modeling of frost salt scaling
Og(uzhan Çopurog(lu, and Erik Schlangen
Cement and Concrete Research Volume 38, Issue 1, January 2008, Pages 27-39 - Modern superconductive materials for electrical machines and devices working on the principle of levitation
T. A. Prikhna
Low Temp. Phys. 32 - Multifunctional composites using reinforced laminae with carbon-nanotube forests
Vinod P. Veedu, Anyuan Cao, Xuesong Li, Kougen Ma, Caterina Soldano, Swastik Kar, Pulickel M. Ajayan and Mehrdad N. Ghasemi-Nejhad
Nature Materials 5, 457 - 462 (2006) - Multilayers Design for the Electromagnetic Sheet Metal Forming Die
Wolfgang Tillmann and Evelina Vogli
Metallurgical and Materials Transactions A
Volume 37, Number 4, 1343-1352 - Nanoindentation analysis of time-dependent deformation in as-cast and annealed Cu–Zr bulk metallic glass
Byung-Gil Yooa, Jun-Hak Oha, Yong-Jae Kima, Kyoung-Won Parkb, Jae-Chul Leeb and Jae-il Jang
Intermetallics Volume 18, Issue 10, October 2010, Pages 1898-1901 - Nanoindentation and Morphological Studies of Epoxy Nanocomposites
Lu Shen, Lei Wang, Tianxi Liu,Chaobin He
Macromolecular Materials and EngineeringVolume 291, Issue 11 - Nano-indentation at the surface contact level: applying a harmonic frequency for measuring contact stifness of self-assembled monolayers adsorbed on AU
Chia-Wei Changa, Jiunn-Der Liao
Nanotechnology 19, 315703 - Nanoindentation hardness of banded Australian sedimentary opal
P S Thomas, A S Smallwood, A S Ray, B J Briscoe and D Parsonage
Journal of Physics D: Applied Physics,Volume 41, Number 7 - Nano-indentation of hybrid silica coatings on surgical grade stainless steel
Josefina Ballarre,Damián A. Lopeza and Ana L. Cavalieri
Thin Solid Films Volume 516, Issue 6, 30 January 2008, Pages 1082-1087 - Nanoindentation of Si, GaP, GaAs and ZnSe single crystals
S E Grillo, M Ducarroir, M Nadal, E Tournié and J-P Faurie
Journal of Physics D: Applied Physics, Volume 36, Number 1 - Nanoindentation of the insertional zones of human meniscal attachments into underlying bone
K.N. Haucha, M.L. Oyenb, G.M. Odegarda and T.L. Haut Donahue
Journal of the Mechanical Behavior of Biomedical Materials Volume 2, Issue 4, August 2009, Pages 339-347 - Nanoscale characterization of engineered cementitious composites (ECC)
Aaron Richard Sakulich,and Victor C. Li
Cement and Concrete Research Volume 41, Issue 2, February 2011, Pages 169-175 - Nano-scale oxide dispersoids by internal oxidation of Fe–Ti–Y intermetallics
J.H. Schneibel,and S. Shim
Materials Science and Engineering: A Volume 488, Issues 1-2, 15 August 2008, Pages 134-138 - Nanotube mechanics – Recent progress in shell buckling mechanics and quantum electromechanical coupling
J.F. Watersa, P.R. Guduru,and J.M. Xu
Composites Science and Technology Volume 66, Issue 9, July 2006, Pages 1141-1150 - On the hardness of shear bands in amorphous alloys
Byung-Gil Yooa, Yong-Jae Kima, Jun-Hak Oha, U. Ramamurtyb and Jae-il Jang
Scripta Materialia Volume 61, Issue 10, November 2009, Pages 951-954 - Optical and mechanical properties of MgO crystals implanted with lithium ions
B. Savoini, D. Caceres, I. Vergara, R. Gonzalez, R. C. da Silva, E. Alves, and Y. Chen
J. Appl. Phys. 95, 2371 (2004) - Opto - Mechnaical Reliability Studies of Aln Driven Cantilevers
A. Andrei, K. Krupa, L. Nieradko, C. Gorecki, L. Hirsinger, P. Delobelle, J. Kacperski and M. Jozwik
Experimental Analysis of Nano and Engineering Materials and Structures 2007, C, 4, 539-540 - Osteointegration of HA-Coated Subperiosteal Dental Implants: Preliminary Work
M. C. Ibanez, C. Bourgeois, J. E. Lemons and A. W. Eberhardt
IFMBE Proceedings, 2009, Volume 24, Part 3, Part 3, 29-30 - Preparation and optical limiting properties of carbon nanotubes coated with Au nanoparticle composites embedded in silica gel-glass
Chan Zheng,Wenzhe Chena, Xiaoyun Yea, Shuguang Caia, Xueqing Xiaoa and Mingjie Wang
Materials Letters Volume 65, Issue 2, 31 January 2011, Pages 150-152 - Properties and structure of (50 -x)BaO–xZnO–50P2O5 glasses
Byung Hae Junga, Duk Nam Kima and Hyung-Sun Kim
Journal of Non-Crystalline Solids Volume 351, Issues 40-42, 15 October 2005, Pages 3356-3360 - Properties of tooth enamel in great apes
James J.-W. Lee,Dylan Morrisa, Paul J. Constantinob, Peter W. Lucasb, Tanya M. Smithc and Brian R. Lawn
Acta Biomaterialia Volume 6, Issue 12, December 2010, Pages 4560-4565 - Rate-Dependent Deformation Behavior of Zr-Based Metallic-Glass Coatings Examined by Nanoindentation
F.X. LIU, Y.F. GAO, and P.K. LIAW
The Minerals, Metals & Materials Society and ASM International 2008 - Reduction of the residual compressive stress of tetrahedral amorphous carbon film by Ar background gas during the filtered vacuum arc process
Tae-Young Kim, Churl Seung Lee, Young Jin Lee, Kwang-Ryeol Lee, Keun-Hwa Chae, and Kyu Hwan Oh
J. Appl. Phys. 101, 023504 (2007) - Removal rate model for magnetorheological finishing of glass
Jessica E. DeGroote, Anne E. Marino, John P. Wilson, Amy L. Bishop, John C. Lambropoulos, and Stephen D. Jacobs
Applied Optics, Vol. 46, Issue 32, pp. 7927-7941 (2007) - Replica Mold for Nanoimprint Lithography from a Novel Hybrid Resin
Bong Kuk Lee,Lan-Young Hong ,Hea Yeon Lee,Dong-Pyo Kim,and Tomoji Kawai
Langmuir, 2009, 25 (19), pp 11768–11776 - Shear Band Formation in Fe–Cr–Mo–V–B–Si Amorphous Alloy under Nanoindentation
M. N. Vereshchagin, S. N. Dub, V. G. Shepelevich and O. M. Ostrikov
Journal of Applied Mechanics and Technical Physics, Volume 45, Number 3, 449-452 - Size, geometry and nonuniformity effects of surface-nanocrystalline aluminum in nanoindentation test
Yueguang WeiE-mail The Corresponding Author, Siqi Shu, Ying Du and Chen Zhu
International Journal of Plasticity, Volume 21, Issue 11, November 2005, Pages 2089-2106 - Size-dependent mechanical properties of molybdenum nanopillars
Ju-Young Kim and Julia R. Greer
Appl. Phys. Lett. 93, 101916 (2008); doi:10.1063/1.2979684 (3 pages) - Some critical experiments on the strain-rate sensitivity of nanocrystalline nickel
R. Schwaiger, B. Moser, M. Dao, N. Chollacoop, S. Suresh
Acta Materialia 51 (2003) 5159–5172 - Spark plasma sintering and mechanical behaviour of ZrC-based composites
Diletta Sciti,Stefano Guicciardia and Mats Nygren
Scripta Materialia Volume 59, Issue 6, September 2008, Pages 638-641 - Spark plasma sintering of a nanocrystalline Al-Cu-Mg-Fe-Ni-Sc alloy
Alejandro Zúñiga, Leonardo Ajdelsztajn and Enrique J. Lavernia
Metallurgical and Materials Transactions, Volume 37, Number 4, 1343-1352 - Specimen Size Effects on Zr-Based Bulk Metallic Glasses Investigated by Uniaxial Compression and Spherical Nanoindentation
H. Bei, Z.P. Lu, S. Shim, G. Chen and E.P. George
Metallurgical and Materials Transactions A
Volume 41, Number 7, 1735-1742 - Strength differences arising from homogeneous versus heterogeneous dislocation nucleation
H. Bei, Y. F. Gao, S. Shim, E. P. George, and G. M. Pharr
Phys. Rev. B 77, 060103(R) (2008) [4 pages] - Strength of self-organized TiO2 nanotube arrays
Hiroyuki Hirakata,Kenji Itoa, Akio Yonezua, Hiroaki Tsuchiyab, Shinji Fujimotoa and Kohji Minoshima
Acta Materialia Volume 58, Issue 15, September 2010, Pages 4956-4967 - Strong crystal size effect of deformation Twinning
Qian Yu, Zhi-wei Shan, Ju Li, Xiaoux Huang, Lin Xiao, Jun Sun, Evan Ma
Nature - Structural Amorphous Steels
Z. P. Lu, C. T. Liu, J. R. Thompson, and W. D. Porter
Phys. Rev. Lett. 92, 245503 (2004) [4 pages] - Structural and mechanical properties of sputtered cubic and hexagonal NbNx thin films
M. Benkahoul,E. Martinez, A. Karimi, R. Sanjine´s, F. Le´vy
Surface and Coatings Technology Volumes 180-181, 1 March 2004, Pages 178-183 - Structural changes in aluminum alloys upon severe plastic deformation
A. A. Mazilkin, B. B. Straumal, S. G. Protasova, O. A. Kogtenkova and R. Z. Valiev
Physics of the Solid State, Volume 49, Number 5, 868-873 - Study of joining of carbon/carbon composites for ultra stable structures
M. Salvo,V. Casalegnoa, Y. Vitupierb, L. Cornillonb, L. Pambaguianc and M. Ferraris
Journal of the European Ceramic Society Volume 30, Issue 7, May 2010, Pages 1751-1759 - Subsurface evaluation of hydrothermal degradation of zirconia
J.A. Mun˜oz-Tabares , E. Jime´nez-Pique´,M. Anglada
Acta Materialia Volume 59, Issue 2, January 2011, Pages 473-484 - Superhard nanocrystalline silicon carbide films
Feng Liao, S. L. Girshick, W. M. Mook, W. W. Gerberich, and M. R. Zachariah
Appl. Phys. Lett. 86, 171913 (2005) - Surface modification of 3Y-TZP with cerium oxide
F.G. Marro,J. Vallea, A. Mestraa and M. Anglada
Journal of the European Ceramic Society Volume 31, Issue 3, March 2011, Pages 331-338 - Synthesis and properties of graphite-like carbon by ion beam-assisted deposition
H. Huang, X. Wang and J. He
Materials Letters Volume 57, Issues 22-23, July 2003, Pages 3431-3436 - Tailoring materials properties of UFG aluminium alloys by accumulative roll bonded sandwich-like sheets
Tina Hausöl, Heinz Werner Höppel and Mathias Göken
Journal of Materials Science, Volume 45, Number 17, 4733-4738 - Tensile and compressive behavior of tungsten, molybdenum, tantalum and niobium at the nanoscale
Ju-Young KimDongchan Janga and Julia R. Greer
Acta Materialia
Volume 58, Issue 7, April 2010, Pages 2355-2363 - Tension-driven cracking of an expanded austenite layer
B. A. Latella and K. T. Short
Journal of Materials Science
Volume 39, Number 13, 4321-4324 - TESTING MATERIALS’ HARDNESS SCIENCE, TECHNOLOGY & APPLICATION
Zbigniew H. Stachurski
MATERIALS FORUM VOLUME 30 - 2006 - The application of surface coatings for low wear and low friction performance between valve train components
Lawes, Simon Donald A. J
University of Leicester 2009 - The contact response of thin SiC-coated silicon systems—characterisation by nanoindentation
E. G. Berasategui, and T. F. Page
Surface and Coatings Technology Volumes 163-164, 30 January 2003, Pages 491-498 - The in-situ mechanical testing of nanoscale single-crystalline nanopillars
The in-situ mechanical testing of nanoscale single-crystalline nanopillars
JOM Journal of the Minerals, Metals and Materials Society
Volume 61, Number 12, 19-25 - The Mechanical Properties in the Vicinity of Grain Boundaries in Ultrafine-Grained and Polycrystalline Materials Studied by Nanoindentations
E. Schweitzer, K. Durst, D. Amberger and M. Guken
Mat. Res. Soc. Symp. Proc. Vol. 821 © 2004 Materials Research Society - The role of substrate plasticity on the tribological behavior of diamond-like nanocomposite coatings
J.M. Jungka, J.R. Michaela and S.V. Prasad
Acta Materialia Volume 56, Issue 9, May 2008, Pages 1956-1966 - The size effects in hardness of polycrystalline niobium
Yu. I. Golovin, M. G. Isaenkova, O. A. Krymskaya, V. M. Vasyukov, R. A. Stolyarov, A. V. Shuklinov and L. E. Polyakov
Technical Physics Letters
Volume 36, Number 4, 369-370 - Theoretical Strength and the Onset of Plasticity in Bulk Metallic Glasses Investigated by Nanoindentation with a Spherical Indenter
H. Bei, Z. P. Lu, and E. P. George
Phys. Rev. Lett. 93, 125504 (2004) [4 pages] - Thermal stability in air of surface nitrided 3Y-TZP
J. Valle, A. Mestraa and M. Anglada
Journal of the European Ceramic Society Volume 26, Issue 6, 2006, Pages 1003-1011 - Thermally induced stress hysteresis and co-efficient of thermal expansion changes in nanoporous SiO2
Martin T K Soh, Jeremy Thurn, J H Thomas III and Joseph J Talghader
Journal of Physics D: Applied Physics , Volume 40, Number 7 - Three-Dimensional SiCN Ceramic Microstructures via Nano-Stereolithography of Inorganic Polymer Photoresists
Tuan Anh Pham, Dong-Pyo Kim, Tae-Woo Lim, Sang-Hu Park, Dong-Yol Yang, and Kwang-Sup Lee
Advanced Functional Material, Volume 16, Issue 9, pages 1235–1241, June, 2006 - Transverse Properties of Carbon Fibres by Nano-Indentation and Micro-mechanics
Romain Maurin, Peter Davies, Nicolas Baral and Christophe Baley
Applied Composite Materials
Volume 15, Number 2, 61-73 - Tribological behaviour and mechanical properties of low temperature gas nitrided austenitic steel in relation to layer morphology
J. Baranowskaa, S.E. Franklin,and C.G.N. Pelletier
Wear Volume 259, Issues 1-6, July-August 2005, Pages 432-438 - Tribological performance of DLC coatings on UHMWPE
V Martinez-Nogus, F J Medel, M D Mariscal, J L Endrino, J Krzanowski, F Yubero and J A Purtolas
Journal of Physics: Conference Series , Volume 252, Number 1 - Ultra-thin phospholipid layers physically adsorbed upon glass characterized by nano-indentation at the surface contact level
Yun-Ta Yang, Jiunn-Der Liao, Yuh-Lang Lee, Chia-Wei Chang and Hui-Jung Tsai
Nanotechnology , Volume 20, Number 19 - Universal scaling functions for continuous stiffness nanoindentation with sharp indenters
Lugen Wangand S.I. RokhlinCorresponding Author Contact Information
International Journal of Solids and Structures
Volume 42, Issue 13, June 2005, Pages 3807-3832 - Viscoelasticity and high buckling stress of dense carbon nanotube brushes
Siddhartha Pathaka, Z. Goknur Cambaza, Surya R. Kalidindia, J. Gregory Swadenerc, and Yury Gogotsi
Carbon Volume 47, Issue 8, July 2009, Pages 1969-1976 - Wear and corrosion properties of a low carbon steel processed by means of SMAT followed by lower temperature chromizing treatment
Z.B. Wang,J. Lub, c and K. Lu
Surface and Coatings Technology Volume 201, Issue 6, 4 December 2006, Pages 2796-2801 - Wear-resistant and transparent acrylate-based coating with highly filled nanosilica particles
Hui Zhanga, Hui Zhanga, Longcheng Tanga, Zhong Zhang,Lei Gub, Youzhong Xub and Christian Eger
Tribology International Volume 43, Issues 1-2, January-February 2010, Pages 83-91 - Which hardness (nano or macrohardness) should be evaluated in cavitation?
C. Godoy, R.D. Mancosua, R.R. Machadob, P.J. Modenesia and J.C. Avelar-Batista
Tribology International Volume 42, Issue 7, July 2009, Pages 1021-1028 - Yielding, Strain Hardening, and Creep Under Nanoindentation of Precursor-Derived Si–C–N Ceramics
Narayanan Janakiraman and Fritz Aldinger
J. Am. Ceram. Soc., 93 [3] 821–829 (2010)